The methods of stacking stainless steel plates:

1. Stainless steel plate with the same boiler number should be put together so that all stainless steel plate in the boiler can be processed accurantly. And can’t affect the technology process. And it also cana avoid losing and mixing the number.

2.The stainless steel plate of the same contract should be put together so that we can manufacure as contract.

Starting from the point of view of safe production, the following points should also be paid attention to in the accumulation of stainless steel plates:

1. When stacking the stainless steel plate, we should put the symbolic side into the same direction so that find stainless steel we need.

2. The stacking height should meet the requirements of safety technical regulations, the stacking position should be more than 2m away from railways or highways, and it is necessary to leave a passage not narrower than 1m between each stack.

3. It is necessary to have horns or material racks for stacking stainless steel plates to prevent the stainless steel plate stack from sinking and tilting. Everyone knows the magnet, it attracts iron when it sees it, but it repels steel. We just use this physical property to distinguish the true and false stainless steel plates. There are many kinds of stainless steel plate materials, but according to the structure, they are divided into austenite type and martensite or ferrite type. The austenitic type of 310S stainless steel plate is non-magnetic or weakly magnetic, and the martensite or ferrite type is magnetic. However, this is not necessarily the case. For example, the raw material of austenitic 304 stainless steel plate, which is usually used as a decorative tube sheet, is generally non-magnetic, but some can also appear magnetic due to different processing conditions, which cannot be considered counterfeit or unqualified.